Re: VDP no connection
Ok, what log now can I check? I see several files into /space/vdp/logs
View ArticleRe: VDP no connection
Hello, Refer the below links for VDP logs, Collecting VMware vSphere Data Protection 6.x diagnostic information (2115293) | VMware KB Collecting vSphere Data Protection logs when the VDP configuration...
View ArticleClik here to view.
Re: Restore config from 5.1 to 6.5
HI Bonne123 you will not able to ESXi 5.1 to 6.5U1 for 6.5 you should be min in 5.5 Please ind the below matrix
View ArticleClik here to view.
Re: Restore config from 5.1 to 6.5
Nice matrix. You have a link to it? I will not be able to what... restore or upgrade from 5.1 to 6.5? .... or both? Vh, Lars.
View ArticleClik here to view.
Clik here to view.
Re: Vmware VDP is in admin state
Hi Jitu, My VDP appliance is still in admin state.Below is the utilization : /dev/sdb1 256G 171G 86G 67% /data01/dev/sdc1 256G 169G 88G 66% /data02/dev/sdd1 256G 130G 127G...
View ArticleClik here to view.
the ovf package is signed with an invalid certificate
I can't establish vdp, the help is necessary.
View ArticleClik here to view.
Re: the ovf package is signed with an invalid certificate
Hello, I had the same issue in my LAB, it's an warning I skipped and it works fine. But in production it's not recommended to install. If you have a support you can check with VMware. I got this when...
View ArticleRe: the ovf package is signed with an invalid certificate
It is correct.It is necessary to use this utility https://code.vmware.com/tool/ovf/4.1.0.Repack the file with a key --skipManifestCheck. Thank you for your help.
View Articleissue in setup
We are facing issue if office setup file, visited office.com/setup as well but no solution
View ArticleClik here to view.
Re: the ovf package is signed with an invalid certificate
Thanks for this. I was only able to get this to work by converting to ovf files using ovftool as you suggest, but in my case, I did not use --skipManifestCheck as that produced an error. I got a...
View ArticleRe: Monitoring vSphere Data Protection Status using cli/script
Hi SavkoorSuhas, I try the script but file not able to send to my email. I see it is successful but no email come to my inbox. Please advice.
View ArticleClik here to view.
VDP Automation can we do it on POWERCLI?
Hi Guys, I need help, We use VDP as a backup for our VM's is there any way that we can automate the health check report on POWERCLI?
View ArticleRe: VDP Automation can we do it on POWERCLI?
PowerCLI is currently not supported with VDP. There's a script you can use for VDP. vSphere Data Protection PowerCLI ?
View ArticleRe: issue in setup
Hello tomprosch, From the comments below looks like you are not reporting any issues with VMware Products right?
View ArticleRe: VDP Restart and hangs at...
Like most of the other posters here, I have the same stopping point during startup, but with a status=0 (success)I can press enter and the cursor advances a line, but other than that, I can't seem to...
View Article8TB File Server - Dedicated 10 TB LUN - Vpshere 6.0 U1
Hello there,I am searching some articles, but since I found different information regarding this topic, I decided to started my own thread to check if someone else faced a similar issue.For some...
View ArticleClik here to view.
Re: 8TB File Server - Dedicated 10 TB LUN - Vpshere 6.0 U1
Welcome to the Community, VMware supports virtual disks with up to 62TB, so you should basically not have any issues with doing a snapshot based backup.There's unfortunately no way to calculate the...
View ArticleClik here to view.
Re: 8TB File Server - Dedicated 10 TB LUN - Vpshere 6.0 U1
Thanks, Andre.Really appreciate the help!
View Article